AXIS UHF/VHF/CB ANTENNA MOUNT

AXIS UHF/VHF/CB ANTENNA MOUNT

Product Overview:

This Axis UHF/VHF/CB Antenna Mount runs a straightforward 5/16" stud with 26 TPI thread, so it matches common radio whips you already see on touring rigs. You bolt it through a clean hole of around 8 mm–9 mm and clamp it tight, then your antenna sits under about 30 mm high above the panel. That keeps it tidy under racks while still giving the whip a solid base.

The metal hardware pairs with an insulated section to suit a standard 50 ohm radio setup and typical 5–25 W UHF, VHF, or CB outputs. Panel thickness from roughly 1 mm to 3 mm is fine, which covers most Aussie wagons, utes, and canopies. It is simple gear, a smart buy if you want a fixed mount that just works while you get out there and tackle long-distance comms.

• Axis UHF/VHF/CB antenna mount for fixed installs

• Uses standard 5/16" stud for common whips

• Fine 26 TPI thread matches many antenna bases

• Compact profile helps clear racks and accessories

• Suits panels roughly 1–3 mm thick

• Provides solid base for UHF VHF CB radios

• Simple mechanical design for straightforward mounting

• Ideal for vehicle roofs, guards, or canopies

• Categorised as electrical communication radio accessory

• Supplied in protective blister packaging