AXIS UHF Right Angle Connector PLC1
Product Overview:
The Axis UHF Right Angle Connector steps in when your radio or antenna lead needs a sharp 90 degree turn without kinking the cable or crowding the dash. The adaptor shifts the exit point just a few millimetres from the radio body so you can tuck the cable along consoles, roof linings or behind trim where a straight plug would push or rub. That means less strain on the socket when the track gets rough. Axis keeps this little bit of gear simple with a full metal body and a knurled section about 10-15 mm wide so you can tighten it by hand. The standard UHF style thread matches common mobile radios and antenna leads, so it drops straight into most existing setups. If you want a cleaner cable path and fewer sharp bends in runs over 0.5 m, this connector is a smart buy.
- Axis UHF right angle connector
- Redirects antenna cable through 90 degrees
- Helps relieve strain on radio sockets
- Compact profile suits tight dash installations
- Metal housing for basic impact resistance
- Knurled grip section for hand tightening
- Compatible with standard UHF radio fittings
- Ideal for roof consoles and shallow cavities
- Supports neater cable routing behind panels
- Simple add-on for existing UHF setups